The Fence – Part 5 of ??


Too Much Tension

After the fifth insulator snapped I emailed Monica at Bluebird Fencing (if you are brand new to fencing I would really encourage you to find a local, independent, fence company to work with; yes we could have gotten things cheaper elsewhere, but Monica has been so helpful, quick to answer, and always kind, I don’t think we could have done this without her help – totally worth the slightly higher cost). I emailed Monica and explained what we were experiencing, and she hadn’t heard of any other customers having the issues we were having. She did say that the insulators are designed to snap if they are under too much pressure, the idea being if your horse gets caught up in the fence and you had to choose between an insulator snapping or their leg you would always choose the insulator. But because of that the insulators don’t do well if they are bowed even a little bit. The moment I read that I flashed back to an image of using the socket wrench to get those little nuts on as tight as we absolutely could – oops. She also mentioned that you only wanted enough tension on the ElectroBraid to keep it from sagging, but no more than that – big oops. In my defense the video we watched explicitly said to pull on the ratcheting part of the tensioner system until you couldn’t get any more slack out. I am not an unusually strong person, I am probably slightly below average, so clearly it wasn’t my inferior strength that did it. That video lied to me!

With that I went back out and loosed every corner roller insulator (which worked well for most of them, though a few refused to move – so we’ll just have to hope for the best on those) and went back through and loosened all the EectroBraid lines. I ran into issues on two of the lines though because we had cut off the line to use on the next run and there wasn’t enough on the ends to slacken it so there are a few interesting splices; but in the end I got everything loosened up and we haven’t had any issues since then. Yay!  I do have some tips for how to tell if you have over tensioned your ElectroBraid.

How to tell if you have over-tensioned your ElectroBraid fence:

  • You can feel the ElectroBraid vibrate when you touch it.
  • If you are wearing a hat and the hat touches the ElectroBraid you can hear it.
  • The tensioner kit won’t release (as soon as I took some of the tension out of the lines the tensioner kit release tab worked like it was supposed to – no more safety release knots needed).
  • The ElectroBraid that is looped around the end posts cannot be shifted up or down at all.

So here is the fence with the ElectroBraid up; it only took a month.

If you are looking at those pictures and wondering if the distance between the top two lines is a little wider than the others, you would be correct. If you are wondering if that is driving me ever so slightly crazy, you would also be correct. If you are wondering why I wouldn’t fix it– think back to the fence update regarding the corner posts and how we decided that to speed things up we would stop being so picky about the location of the diagonal braces. Well, turns out if you aren’t so picky you wind up taking up a lot of the potential spots for the corner insulators. The directions said to have one of the diagonal braces at the 8th hole and then put the other one either above or below it. We got pretty flexible with that and some were above, some were below, some where way above, and some were way below. But that meant the fence line had to be above the highest one or below the lowest one and the least awful choice was to go below the lowest one. For a brief moment I considering redoing the corner posts that were too low, but it was about half of them and that was not going to happen. Next time we’ll make sure all the braces are at the 7th and 8th holes so that I can have all the lines spaced evenly. Our experiences are definitely cautionary tales, not instructional guides.

Now to just find those gates!

The Fence – Part 4 of ??


Under Tension

While the search for gates continued, we started installing the ElectroBraid; running from one side of one gate to one side of the other gate.

Before we get in to details, I want to remind everyone that these are more cautionary tales than instructional guides and this post in particular should not be viewed as a “how-to” but as a “how-not.” For those of you who have installed this kind of fence this may be like watching a small, not very serious, train wreck unfold.

Step One – Install the Corner Insulators

The corner insulators have a roller allowing the ElectroBraid to freely change direction and we needed to put them on all the corner posts and end posts. You may be asking yourself – “If the rollers are to change direction why are you putting them on the end posts?” That is an excellent question that I should have asked myself. As with everything else this turned out to be harder than expected. Though the insulators are pre-drilled, it is a pilot hole and isn’t threaded, so getting the bolt through requires some pressure. The back of the insulators are also flat and the posts are round, so trying to hold a flat surface against a rounded surface while putting pressure on a long bolt wasn’t easy. Particularly not with my still not fully functioning wrist. I was leery about using anything motorized since we were working with plastic and on unstable surfaces and I am accident prone.  After doing the first three posts the hard way I decided to pre-screw the bolts into the insulators in the house on a nice flat surface. That way I felt comfortable using our impact driver and it went much faster. That part worked as planned. The issue is that the holes in the posts weren’t drilled nice and straight through the center of the posts, they were almost all off just a little bit. Sometimes this didn’t seem to matter and the bolts slid right through on the first try. And sometimes I spent 45 minutes (forty-five minutes!) just getting one stupid insulator in. I put each bolt through individually to make sure that it would work, yes worked fine, but when they both had to go in – NO. At one point I even took the insulator all the way out and put it in from the other direction just to see if I had lost my mind and the two bolts just popped right in!! Then I put it back on the side it had to be on and – NO. Had there been a table available to flip at that point I would have. We did get them all it but it wasn’t the quick afternoon project I thought it would be. I was also really worried about the fact that these insulators, which seem to be a critical aspect of the fence system, are ultimately held on by two tiny little nuts.

So I really tightened them; breaking out the socket wrench! Okay maybe it was also an excuse to use the socket wrench, which I enjoy using way more than is normal. Nate helped with some of this, but at one point tightened that little nut so much he broke off the end of the bolt… oops. So then I took over that part – though at one point I also tightened to the point of hearing a little crack…. oops again.

Step Two – Install the First Line of ElectroBraid

Run one line of ElectroBraid through all the corners and then use that to locate the inline posts so they are actually in-line and you don’t look like you put the fence up while drunk. This is a legitimate concern; I had put up some marker posts for the farmer so he would know where not to plant this year and despite several attempts I could never get them even remotely straight. This way worked much better! To be extra sure we had them straight we decided to run both the top line and the bottom line and to tension both lines. Particularly because on our two very long runs we couldn’t get the bottom line up and off the ground even with all our by-hand pulling. I ran the top line of ElectroBraid through all the corner insulators and connected it to one of the gate posts with one split-bolt connector as directed. Then I went to the corner before the first long run, put on the tensioner kit which was much harder than the video showed, pulled it, and managed to snap something; luckily not in my body! I went to look, and my single split-bolt connector was no where to be seen. Try, try again. I put the ElectroBraid back on; I used two split-bolt connectors this time and I tightened the ever living daylights out of them. I went back to the corner, reset the tensioner, pulled, and it worked! On to the next corner. Because we have such long runs we had to use two tensioners. You put a tensioner on one corner and pull out as much of the slack as you can (which is what the video tells you to do), then put the second tensioner on another corner, again pull out as much slack as you can, then go back and get the first tensioner off that first corner and move it down to the next corner, repeat until you’ve gotten all the slack out of the line. The problem was we couldn’t get the tensioners to release. There is this little release tab that is supposed to let go and of course it wouldn’t. Most of the time I would just wiggle the hook part on the other end enough to get it to slip off but a few times we had to use the butt of a kitchen knife to push the tab to release it but each time we did that it felt like it was going to snap off. And then it did. Of course. The next day we purchased another tensioner, and I had the genius idea of using a quick release knot (the kind you use to tie a horse so you can release it quickly in an emergency even if it is under a lot of pressure) on the other end of the tensioner so we could use that to get it off. That worked much better; most of the time.

Side note – this is a good reminder that the basic quick release knot isn’t actually the best one to use because sometimes if things pull just right it won’t release. I really need to re-learn the better version to use with horses. Back to our tale of mishap.

I also realized that the metal clamp part of the tensioner system goes on much easier if the plastic ratchet part isn’t already hanging on the one end. I have no idea why this makes a difference, but it did. Now we had the top and bottom lines up and tensioned. If you touched it you could feel it vibrate from the tension and if our hat brims touched the fence line you could hear it hum.

Step 3 – Install the Inline Posts

We had gotten what we thought was a rod to use to put in pilot holes in the ground for the inline posts. It was three feet long, metal, pointed on one end with a handle on the other. We would get that positioned, Nate would mallet it in, then we’d pull it out and put in the 8-foot inline post and then pound that in. On the very first try Nate managed to break our new mallet. Of course. This is why buying the absolute cheapest option doesn’t always save you money. Luckily I had also bought a more expensive mallet and hadn’t returned it yet so the more expensive one it was! We got through about half the posts before our metal pilot hole thing hit a rock and went from being a T to a J. Of course. Another run to the store – except they didn’t have any more. So I started looking online to see if I could find one and it turns out they are not pilot hole tester things, they are their own grounding rods to use with temporary systems. Oops. So now what? Driving 8-foot-tall posts into the ground straight was close to impossible before, how are we going to do it now? Bluebird fencing mentioned that some clients have used a giant drill bit to drill a pilot hole into the ground to get them started so I went searching for that. Best I could find was 18” long. Not ideal, but better than nothing. This is also when I re-discovered my complete inability to drill straight. You could offer me $1,000,000,000 and all I had to do was drill one hole straight in the ground and I could not do it. The first one I tried I think I drilled 20 holes trying to get it in straight; truly ridiculous. I did eventually get better. The trick was to keep drilling into the same spot, somehow all my mistakes slowly fixed each other until I was close enough to straight. You would also think that if every time I was too far up and to the right I could correct for that but no; I was almost always too far up and to the right, except for the two times I was too far down and to the left. Regardless I got them in and straight enough to be acceptable.

Step 4 – Install the Insulators on the Inline Posts

We used quick clip insulators for the inline posts. You slip them on the post, twist them to get the ElectroBraid in, and then screw them in place with a tiny screw in the back. One thing we actually did right was to measure out where all the insulators were on the corner posts and then pre-marked all the inline posts in the garage before installing them. The top and bottom lines were already up and tensioned so getting them into the insulators was much harder than the directions indicated. Nate did discover the hack of putting the insulator on the top line of ElectroBraid first, and then putting the insulator on the inline post, which was much easier, but that wasn’t an option for the bottom line.

Step 5 – Install the Remaining Lines of ElectroBraid

We were in the middle of putting up the middle two lines of ElectroBraid when this happened:

That top line is NOT supposed to cut across like that. No big deal I thought, that was the corner post where I had heard the crack so I had probably cracked that corner insulator and that is why it broke. We released the tension, put on a new corner insulator, and re-tensioned that line and then continued on. The two middle lines went better. Putting them through the insulators before tensioning it made it go much faster and we got better at positioning the quick-release knots of the tensioners so that they would, in-fact, quick-release.

With that we had the wire up and run for about 2/3 of our fence line. YAY!!!

I then started counting out the insulators for the rest of the fence so I could pre-screw the bolts in and realized that we were short. That can’t be right! I counted everything when we went through the corner post debacle. It was at this point that I realized you aren’t supposed to use the CORNER rolling insulators on an END post. You are just supposed to loop the ElectroBraid around the end post. Of course. The distance to travel around the outside of the post is just a bit longer than going through the insulator and the bottom line was already so tight there wasn’t any slack to work with so I had to go and loosen it at the other end and discovered that we had over tightened the split-bolt connectors and the ElectroBraid was starting to fray. Of course. So now we have to loosen all the connections just a little bit. Back to the bottom line – we had to put everything into tightening it to get it around the end post but we did it! And then another insulator snapped and there went that bottom line. Of course. We loosened the other end a little more and tried again and then it stayed.

Until two days later when not one, not two, but three of the lines broke their corner insulators.

Of. (expletive of your choice). Course.

Gate Expectations


Went looking for gates and somehow bought a round pen

Though we got almost everything we needed for our fence from Bluebird fencing we did not get the actual gates. We also wanted to get something to temporarily close off part of one of the shelters so we could use it as a makeshift stall until the barn is built. However, it is temporary (I will get my barn!) and anything 12-feet long, at least 4-feet high, and strong enough to stand up to a horse is going to be expensive so I wanted to get something we could repurpose – something like a 12-foot round pen panel (also called a corral panel) or gate. This meant I was looking for gates for the current track system plus at least two 12-foot corral panels or gates for our temporary stalls.

The issue is that to be horse safe these are inherently large, heavy-duty, gates and therefore not something we can transport in either of our cars. It also means that if you find a place selling good products at decent prices, but they are outside of your state, the freight costs eat up any potential savings. I had been looking at the stores in our area that do sell them, Fleet Farm, Tractor Supply, and Runnings (haven’t been to it yet but I’ve heard good things). Unfortunately, they either don’t deliver, or delivery added an extra $100+ to each gate and their websites were not easy to search or use to compare products. That ridiculously long video from Cashmans also spends time talking about corral panels and he mentions the importance of construction and materials, he also mentions many places don’t say what gauge their metal is, so you have go by the weight of the gate or panel to guess. He was correct in this, except many of the sites I was searching didn’t disclose the weight information either – great. But I kept finding these smaller operations in other states selling quality gates and corral panels for cheaper than the big stores and I felt like there had to be one like that closer to me – and I found one!

Quick side-note, from the beginning of this farce project, I have been contemplating who will be keeping Leeloo company once she is home. During that contemplation it also occurred to me that whoever it is will be new to me and though some people are cool working with new animals out on a trail or in a field I am a cautious person by nature (there is a reason my current Wordle streak is 221 wins but my average guess length is 4.2) and prefer to work in an enclosed area. Ideally one not enclosed by a barrier that will shock me or said animal if we accidently make contact with it. After that first corner post took us an entire day to install I asked Nate how he would feel if we modified the original plan and put a round pen in the center of our track system instead of another electrified fence run. This would save us four corners and two end posts, so we would only have to do 12 more and not 18 more! He was open to the idea and became more open with every corner we installed. This meant as I was searching for gates, I was also kind of low-key searching for round pens as well.

Livestock Panels of MN is located only forty miles from me and sells gates and round pens – perfect! It is a side project for someone with a contact in Texas, every couple of months they get big shipments of corral panels and gates and then sell them out as single items or entire round pens. The best part is they deliver and they are close enough that the delivery fee is super reasonable! However, at that particular moment they only had 10-foot panels and 4-foot wide gates and wouldn’t be getting anything new for at least a month or two and I thought we would have Leeloo home before then – HA! But they did have a 60-foot round-pen package available and the price was really good; I bought it and they delivered it the next day!

We still need gates though….

Fence – Part 3 of ?


Yet Another Fence Post

We did get more efficient at installing the corner posts. If you continue watching that hour long video I mention in Fence – Part 2 there is another clip with more details and tips. Still rather unrealistic though; they show a single person installing a corner post by themselves like it’s no big deal. Getting the proper tools was probably the biggest help as was assembly-lining some of the steps in the shade of the garage. But it wouldn’t be us if there weren’t some snags.

All of the vertical posts and the diagonal brace posts need aluminum inserts that had to be screwed in place with set screws; after the first three corners we decided to do all of that at once in the garage, where it was cooler and less buggy. That was when we started discovering a few additional missing or faulty parts, first it was a missing nut, then two fused together washers, then a faulty insert. By then I was getting concerned and decided to go through every bag of parts to see if we were missing anything else. All total we were missing: one nut, seven set screws (one bag was missing every set screw!), and nine washers (another bag was missing every washer!), plus the faulty insert. I contacted Monica at Bluebird Fencing who was very apologetic and who immediately contacted Geotek and they were great about it and overnighted me every missing piece, and while we were at it we got a new hand-tool hub so we could actually use all four handles! My overall review of Geotek is that their customer service is amazing, but they seriously need to invest in a quality control process or person! They have answered every question we’ve had very quickly and have sent us every missing or malfunctioning part we have notified them of within a day or two, I just wish I hadn’t needed so many things replaced.

Did you see that “we have notified them of” bit? Two of the gate braces had their insert holes drilled facing the wrong way but we didn’t ask to replace them because they still function, we just had to dig a deeper hole to get the wrench down there to tighten the set screws. The other, bigger, issue we haven’t dealt with yet is that one of the horizontal braces has an endcap facing the wrong direction. One endcap needs to face up and the other needs to face down and instead this one is turned only half-way making it unusable. We’re hoping we can fix that ourselves but we haven’t tried yet.

In the end our best time was two and a half corners in a single day, not great, but much better than one a day. Practice helped of course, but so did relaxing the standard on how level the vertical posts needed to be (except the gate posts, we tried hard to get those level) and we stopped being so picky about where the braces ended up on the vertical posts. We made sure one always landed at the eighth hole, which is what the directions said, but we stopped caring if the second one was directly touching it. We did learn a lot and I have some tips for installing this type of corner system; I’m guessing some of this would apply to other types of corner systems as well.

Tips for installing the Geotek Common Sense Fence and Mule System:

  • Check EVERYTHING you get when you get it to make sure nothing is missing or faulty – literally every nut, bolt, washer, etc.
  • Have the proper tools! In this case we needed a needle nose vice grip, two wrenches and one of them absolutely must be a socket wrench (which is my new favorite tool ever), a tape measure, and a level (this wound up being optional for all but the gate posts – time will tell if that was a good choice).
  • Have at least two people, three is even better. If you have loamy soil and you buy longer bolts you might be able to do this by yourself, but if you are working with what they give you or you’re dealing with heavier soil, you need at least two people.
  • Pre-measure and mark the vertical posts for where ground level should be and mark where the target hole is for the diagonal braces.
  • If working with clay soil stop and water it occasionally if it gets too hard to work with; that helped a lot.
  • Stop partway through installing the augers and check for angles. For the vertical post try to get that auger straight down and for the diagonal ones stop intermittently and put the brace on and see where it is lining up with the vertical post. It is easier to correct as you go then after the auger is all the way in the ground.

For anyone interested in installing the Geotek Common Sense Fence and Mule System I did a voice over of that somewhat helpful video clip with our experience compared to the video.  You can watch it on our new Lantern Farm MN YouTube channel. Unfortunately, since both Nate and I had to actually be involved with the installing of our own corners we weren’t able to record our process, but I did take pictures:

Having the right tools makes all the difference!

Putting all the aluminum inserts in at one time sped things up, just make sure you put the metal braces on the diagonal posts first!

Pre-marking ground level makes this step much easier – make sure you can see that mark from every side.

Our handles almost always hit the ground before we got the diagonal auger all the way in so we had to dig a small trench to finish.

We are way too low on our angle for the diagonal post. Getting that angle right is the hardest part of the process.

We needed to clamp the metal braces in order to get the bolt far enough through to also get the washer and nut on it.

We now officially have all the corners up and one end post for each of the two gates. We just need to find, purchase, and install gates; put up the Electrobraid; and then electrify it. How hard can that be?

Fence – Part 2 of ??


There is a general outline that appears to be true about installing any type of tension-based fence.

  1. Decide where the fence is going to go, in particular the location of all the corner, end-posts, and gates.
  2. Install the corners, end-posts, and gate posts.
  3. Put up a line or two of your fencing material and put a minimum amount of tension in it.
  4. Use your line of fencing material to determine where the in-line posts need to go and put them in.
  5. Put up the rest of the fencing material and tension it.
  6. Electrify it.

We finished step one and now need to do step two – install the corners, end-posts, and gate posts.

The directions that came with the fence system remind me of the directions that are in some of the not-so-great textbooks I’ve had to teach out of. They are written by people who know exactly what they are doing to other people who already know exactly what they are doing. They leave the details out, use technical vocabulary that is not defined, have limited visuals, and are super dense. I read and reread and reread the directions referencing and re-referencing the two diagrams they had and still felt like I had no clue how to do this, so I went searching for a video online. There has to be a video online somewhere– right?!  Apparently the answer is: sort-of.

There are a few other companies around the country that sell the Geotek Common Sense Fence and Mule System and one of them is Cashmans in Ohio. Before we purchased the fence I did search around to see if I could get a better price and though some of these places were cheaper, they were all farther away and because these components require freight shipping the additional shipping costs always offset any potential savings. If you are near Ohio Cashmans may be a good choice for you, but they were not for us. I say this because the ONLY video I could find about installing our fence system was part of a longer YouTube video Cashmans’s put out that contains what appears to be various parts of some 1990’s era, VHS quality, video.

I watched the whole video (which was over an hour) and then made Nate re-watch the pertinent parts with me before we went out to install our first corner. The video makes it appear VERY easy.

 

LIES! Or perhaps more accurately these are condition dependent truths and we do not have the required conditions and they skip over ALL the details.

Places where the video did not match our reality or left out some major details:

  • The four-handled hand-tool they use to install the augers that we received was not welded correctly so we could not get the fourth handle in it and were working with a three-handled hand-tool which meant instead of handing it off to each other we each had to take a side and spin around in a circle. If you are picturing something like the dizzy bat game you are not far off. We were a bit more graceful, but not by much.
  • They were clearly working in loamy soil and not the heavy clay we’re dealing with. Getting each of those augers in took forever and we often had to make use of the tip from the shelter anchors and water the hole, which of course meant delays as we let the water soak in.
  • If you want your post to be straight then the anchor needs to go in straight which is easier said than done when two people with different strength stats are trying to screw it in.
  • The diagonal brace needs to line up in just the right spot on the vertical post, which they don’t mention at all. That turned out to be one of our biggest challenges and led to one of our bigger arguments throughout this process. We were trying to get the angle right and we would get it in, put the diagonal brace on, and be way too high or way too low. Then we’d take it off, unscrew the auger, re-screw the auger and invariably over-correct. After what felt like the five millionth time of overcorrecting Nate was getting pretty frustrated and angry and in an effort to help I said “because the brace is so long a small change in angle at this end results in a large change at the other end” in what I felt was a calm and reasonable tone of voice – though apparently calm came off as condescending and Nate thought I was calling him an idiot. We got over that eventually and now “a small change on this end will result in a large change on the other end” is a recurring joke whenever the process gets frustrating and one of us is getting mad.
  • Securing the diagonal brace to the vertical brace is MUCH harder than they show. Even once you have the diagonal brace in the right spot the company either changed the brace clamps or switched to shorter bolts because we could not get the bolt through the brace clamp enough to fit the washer and the nut on without having to clamp the brace itself. Of course our vice grip was too wide and trying to fit it on the brace and leave room for the washer and space to turn the nut was an extreme challenge. There was a LOT of swearing for that very first corner and then another trip to LeVahn Brothers hardware (I truly love them!) to get a needle nose vice grip which worked much better.
  • Needing to have the vertical post level-ish, at the right height, and with the pre-drilled holes aimed the correct direction was also not mentioned at all and was also a challenge. Particularly because for almost every corner post the holes were not drilled in straight through the post but slightly off to one side or in some cases not straight down the length of the post. It wasn’t till an argument at the second corner that we realized this. Nate was on one side insisting it was aimed correctly and I was on the other side insisting he had lost his mind because they were not even remotely aimed correctly only to realize we were both correct because the holes don’t go through straight.
  • The video shows them doing the four-foot corners which don’t require a horizontal brace but the five-foot corners we have require a horizontal brace. Getting that to line up correctly with everything is also a challenge.
  • The insulators do not go in that easy! It probably has to do with the holes not being drilled straight through the posts so the angles are off just enough to make the bolts catch. In one case it took me over 45 minutes to put in a single insulator! 

But other than that – simple and easy. And they really aren’t going anywhere. It took us an entire day just to get that first corner in, after which Nate declared we’re just buying new fence once we get the barn built and we’re never moving this one.

 

Now we just need to do 18 more!

Third Interlude


I don’t need to explain my art to you.

There is much more to the fence story, however the next part will ideally have a multimedia component that is currently causing me difficulties, so we’ll take a brief break to discuss bugs and my hatred of them.  Also, a quick update on this post – according to a neighbor the rodents in question are most likely thirteen-lined ground squirrels and not chipmunks, though the chipmunk trap worked just as well on them, but also the larger holes I’m seeing are most likely not made by the ground squirrels but by the snakes that like to hunt them. Fun times! They (or maybe chipmunks for real this time?) are back and so we’ll need to do another round of white bucket traps. Now on to the bugs.

I hate bugs. Not all bugs; bumblebees, butterflies, dragonflies, maybe someday honeybees? (that is a very long term goal) are cool and are welcome to stay. Spiders, wasps, flies of all varieties, and ticks *shudder* are not welcome guests. I’m doing much better about spiders than I used to, provided they stay outside or out of sight. If they come in my house and make themselves visible they need to die. I have managed to live and let live with all of the spiders I encounter outside – including the super creepy black with white spots spider that startled a ridiculous shriek out of me when it came around the corner of the fencepost right into my face. Wasps are trickier, I know they are necessary pollinators and helpful in hunting other insects but I would like to be able to turn the hose on without fear of being attacked so any nests by the house have got to go. Flies and ticks are another story. They are not welcome anywhere for any reason and knowing that horses and possibly other animals will soon be coming home means the flies and ticks are going to get worse and I wanted to take some preemptive measures.

A friend of mine in WI who also has horses has long used fly predators and has had many a good thing to say about them, so this spring when I got a catalog from Spalding Laboratories with their various fly control options I decided to order their fly predators to help control the “filth” flies or “pest” flies which include house, biting stable, and horn flies. We’ve been getting the fly predators every few weeks since this spring and they seem to be working. I can’t say with too much certainty since we don’t actually have any animals on the property yet (when this whole thing first started I thought I’d have Leeloo home by June 15 but probably July 1 -HA!), but there seem to be less around and Nate and I are pretty in tune to flies in and around the house because of a minor fly infestation at our previous house. If either of us sees a fly in the house all other activities stop until we kill it! So overall I think they are working. Unfortunately those predators only work on flies that lay their eggs in manure or other organic matter and it turns out that horse flies and deer flies lay their eggs in water and the fly predators don’t do anything to them. The same company does make an “H-trap” that is supposed to trap and kill deer and horse flies and it had some pretty good reviews online so despite the hefty price tag we decided to get it.

I’m not sure what I was expecting, there is a picture online (here) but there is no sense of size or scale. This thing is large! Which explains the price tag. It also has to be placed very intentionally. Namely in a spot that is sunny all day and is in the direct path from wherever the flies are coming from. The flies are not going to pass up an existing meal to get to the trap, but if the trap is between them and other options they’ll go to the trap first. The horse and deer flies are unquestionably worse at the top of the driveway near our mailbox (we are forever getting dive bombed when we get the mail or are watering the trees/plants or mowing up there). My best guess is they are either coming from standing water somewhere in the park across the street from us or from the tiny pond of sorts a few houses down from us. So that means this very large and very unattractive object needs to go right at the top of our driveway for all to see. It got delivered pretty early in the season so it didn’t do much at first (too cold, too windy, and not many bugs out yet) so anytime we would drive in or out of our yard I would look at this expensive giant eyesore that didn’t seem to be doing anything but being “decorative” and declare “I don’t have to explain my art to you!”

gallon container for scale

It turns out it does work! We haven’t caught as many flies as some of the reviews online claim, but it has also been an insanely dry summer so the overall numbers are down. I can say that we are not only catching flies but some mosquitos and gnats too and we are not being dive bombed nearly as much when getting the mail, watering, or mowing and that is what matters. It also turns out to be a great conversation starter with neighbors. I have had several iterations of the following conversation:

Neighbor: So what exactly is that thing at the top of your driveway?

Me: You mean my art piece?

Neighbor: (awkward pause while they contemplate what they may have just gotten in to)

Me: It’s a fly trap, it’s much larger and much uglier than I expected.

Neighbor: (clearly relieved) – does it work?! If so, I may have to get one.

The flies are (hopefully) mostly dealt with. We’ll see what happens once the animals are actually home. I may need to get some additional traps but I’m hoping these preemptive measures make a difference.

That leaves the ticks. F*ing ticks. I have a genuine phobia when it comes to ticks of all kinds. I know it is irrational, but ticks are the worst! They don’t just seek you out (unlike other spiders that don’t want anything to do with you), they don’t just bite you and leave (like mosquitos which also suck), but they burrow their heads into your body and then stay with you for days. NO THANK YOU! Between the traumatic experience I had with ticks as a kid and dealing with Leeloo’s Lyme’s disease and their just general disgustingness you can see why I do not like ticks. Unfortunately, I have not found any solution for dealing with them. They may be the thing that pushes me over the edge into some sort of scorched earth scenario that involves poison or perhaps literally scorching the earth, but I’m hoping not.

Anyone have any suggestions for how to get rid of ticks without resorting to poison that will wipe out all the beneficial insects too? I really do love our bumblebees and butterflies and don’t want to harm them.  

The Fence – Part 1 of ???


Now we move on to what has become the bane of my existence. The fence. As mentioned in this post, we decided to go with Electrobraid as our fencing material and the Common Sense Fence system with their Mule Corners and fiberglass in-line posts. Before we could install anything it had to get delivered and it was being delivered via freight (i.e. semi-truck). Our experiences with things delivered via semi have been a mixed bag thus far so I was a little nervous. Our driveway is not currently conducive to large vehicles. Long term the plan is to install a smaller circle driveway in the front of the house and a larger one behind the house between it and the future barn, but for now we just have a long somewhat twisty driveway that ends at our garage with only a small turn-around for normal sized vehicles. Hence my concerns.

The first issue was a confusion on contact info, the delivery company called Bluebird Fencing to arrange a delivery day and not me. We got that sorted and luckily I asked about equipment to unload it, namely that we don’t have any, which had apparently not been in their notes, so we got switched to a truck with a lift gate. Then of course they gave me a delivery window of “Monday.” Thanks for that. Not having gotten anything more definitive than Monday I spent the day working from home and watching out my window. The day goes by and no truck. As 4:30 PM comes and then goes I call Bluebird Fencing to make sure there hadn’t been another mess up in contact info but she hadn’t heard anything either. She did have tips for next time: always insist on a shorter window and if they won’t give one ask that they contact you the morning of delivery with a smaller window and get the drivers name and direct phone number. Not sure it would have worked, but we’ll definitely try that the next time something large is delivered via freight. About two minutes after I get off the phone with her she calls back because they had messed up our numbers again and had just called her – since she knew we were home and waiting she told them yes, we were home and waiting. Driver finally shows up around 5:30 PM while we were in the middle of making dinner. We stop everything and run outside hoping to catch him before he got too far down our driveway to discuss where exactly to unload this stuff and where he could drive his truck safely. We were not fast enough.

He gets out and starts the unloading process by opening the door and getting the pallet on the pallet jack and then we talk options. One of the other complicating factors is that our driveway is still gravel, we’ll be paving it after the barn is built (the barn will get built!), but things like pallet jacks don’t operate on our gravel driveway. We tell him where we’d like it dropped off – right behind the house and that he doesn’t have to get it that far off the gravel, literally on the grass next to the driveway will work for us. But he thinks he can do some back and forths and get the truck in a slightly better spot. I don’t know what he was trying to do, but what he did do is get back in the truck, back it up, and then pull forward. Meanwhile the still engaged pallet jack is continuing in the direction it started going – right out the back of the truck and crashing onto our driveway as Nate and I watch it all in fascinated dismay. He gets out, looks at it, and says “guess we’re hand unloading after all” and just starts unloading it onto our grass. Really wish we would have had our phones to film it. In retrospect I should have insisted he wait until I could take pictures in case anything was damaged in the fall – well other than the pallet jack which was toast, but that was his problem and not mine. We chip in and help unload which is when I first discovered that if you handle fiberglass stuff you need to wear gloves! Nate didn’t have issues, but I got several fiberglass slivers and they were not fun. We get it all unloaded and then he insisted that I needed to check if anything was broken right then and there because if I didn’t file a claim then I could never file a claim ever. I’m not sure he was correct, but I did a quick glance at everything and it all seemed fine. It was mostly steel augers and fiberglass fence posts so not exactly breakable. We signed the paperwork that said it was delivered and go back into the house to finish dinner and to not watch as he gets his semi back out of our driveway and on his way.

Once he was gone and dinner was done I went back out to make sure everything was in fact fine and that it was all there. That was a little easier said than done (doesn’t that sound familiar). Very few things were actually labeled and having never worked with any fence system of any kind it was hard to know what I was looking at. I wound up going out with the picklist, the emailed invoice, and a tape measure and checking and rechecking everything that we had. That is when I discovered that it wasn’t all there – we were missing the three anchor braces for the three planned gates. It appears that the picklist, which was two pages, didn’t print quite right and cut off that item. I contacted Bluebird Fencing who contacted Geotek (the makers of the fence system) and they were both super great and overnighted us the missing three pieces. All was well – or so we thought.

Now we just had to turn this:

Into this:

 

How hard could this be?

Second Interlude


Now for a brief interlude whereupon I learn more about earth anchors than I ever wanted to and hurt myself the second time.

Upon ordering the shelters I asked about anchoring them since the other company mentioned it and I was sent the following image, and that was it.

I started searching for earth anchors or earth augers as they are also called and discovered an overwhelming amount of options. Luckily I found a very helpful company, Milspec Anchors, with several very helpful employees. I described the application – anchoring large 3-sided shelters; the environmental conditions – heavy clay soil and very windy; and our available equipment – none. It turns out the round helix at the end of an earth anchor isn’t just to hold them in place once they are in the ground, they also help actively pull the anchor into the ground once you get that part below the surface. They make some anchors with a double helix so the smaller one can help pull the larger one into the ground. Considering our heavy clay soil and no machinery to help us they recommended a double helix anchor and we went with this one. They also had a super helpful tip to dig out a hole about a foot deep first and water the hole before we tried to get the anchors into the ground. Moist clay is much easier to work with than dry clay (think of the soft clay you worked with in art class versus a brick). Getting the hole in the right place and the right amount of water took some fine tuning – but overall a VERY helpful tip!

Now we had to install the anchors, which was easier said than done. We quickly realized that we had no actual tool for turning the anchors and our own strength wasn’t sufficient once we got past that very top layer of wet clay. After messing around a bit with whatever I could find in the garage (not much) I went to my new favorite hardware store on the planet LeVahn Brothers. I cannot overstate how amazingly helpful they have been, not just with this project but several others. You walk in and are immediately greeted by someone who is genuinely knowledgeable and helpful and if there happens to be something they don’t know they find the person who does know to help you. I explained what we were trying to do – getting giant augers buried three feet in the ground with no machinery, oh and there is a structure right up next to where we are working – and we decided our best option was a crowbar. The crowbar helped, but being right next to the shelter made it so much harder because we couldn’t make a full circle, at best we could get a half-turn before we’d have to shift the crowbar and do another half turn. It was a maddeningly slow process, though we did improve on our methods a bit; at first we were completely pulling the crowbar out and repositioning it but we figured out a method for just sliding the crowbar back and forth. Still painfully slow and sometimes the ground just got too hard and we had to stop and water it a bit or have the other person come and push down on the anchor using a block of wood while the other one turned it because the helix just wasn’t up to the task of pulling itself down through our ridiculous soil. If you have ideas for how to do this better we’d love to hear them because at some point we’re going to have to un-anchor the shelters, move them, and re-anchor them and I would really like to have a better process for doing this. Though we do have one helpful tip of our own – put something, in our case we used cardboard, between your shelter and your crowbar so you don’t scratch it all up. You can see how beat up the cardboard got, it was also nice to mark the cardboard to see progress because there were many times when it felt like we were just spinning our wheels, or in this case anchors, and nothing was happening.

There are six anchor points for each shelter so we had twelve anchors to hand screwed into the ground, a process that involved repetitive combinations of twisting while pushing or pulling with my dominant wrist. The wrist that was diagnosed with mild carpal tunnel back in 2019. Let me tell you it doesn’t feel mild anymore. Despite night braces and exercises my wrist was pretty useless after the first two or three anchors so Nate had to do much of the work of actually screwing the anchors into the ground and I was relegated to digging and watering the holes and pushing down on the wood block when they just wouldn’t go farther. Unfortunately, my wrist still hasn’t recovered. It doesn’t help that everything I have to do – typing, writing, cooking, cleaning (something had to go) aggravates that wrist and anchoring the shelters coincided with me prepping for both of my summer classes so there was a lot of typing and writing happening at the same time. I’m still doing my hand and wrist exercises and wearing a brace at night and now also during the day but my wrist still isn’t over its proverbial meltdown which has complicated many aspects of my normal day job of teaching plus all the work we’ve been doing to get Leeloo home.

One other thing that is still complicating the anchoring of the shelters are the giant pieces of wood bracing along the bottom front of the second shelter – we still haven’t been able to get them all off. They used these huge screws and a star shaped bit that we didn’t have. Back to LeVahn Brothers! We took pictures of what we were dealing with and they got us the proper bit but our very old hand-me-down drill from my father was just not up to the task. We wound up getting a new drill and an impact driver. Which worked – for most of them. We got one of the boards off completely and were able to put in the second to last anchor, but there are still three bolts that are stripped and the bit just spins in them. Another trip to LeVahn brothers got us a long metal blade for our reciprocating saw, but unfortunately we still haven’t been able to get through that last bolt. And of course the blade is designed for metal so it didn’t work great on the wood itself when in a fit of frustration we decided to just cut the wood off – we had to abort that effort midway because we had to meet someone to go get some hay. So technically there is still one more anchor that needs to get screwed in, but eleven are in and need to get attached to the shelters themselves. Back to LeVahn Brothers (we should consider buying stock at this point). After contemplating a lot of options, we decided to go with chain links that loop through both the anchor and the bolt in the shelter and then are bolted together with a bolt, washer, and nut. This would allow us to adjust for the different distances (getting the anchors to line up just right with the bolts in the shelter was tricky), remove them, and then reuse them once the shelters get moved.

The anchoring itself wound up being a much bigger expense than I ever expected and took far more time and energy than I had expected. Now that I know the anchoring costs and can factor them in it turns out that the West Wind shelters per square foot prices were comprable to the RFC Portable prices. Add in the time involved, and had we not needed to maximize square footage the West Wind Shelters may have been the better choice.  

There is one anchor issue though yet to be resolved – how do I keep my accident prone horse from injuring herself on these:

I have not been able to think of an idea that won’t in and of itself be an accident waiting to happen or be too easy for the horses to remove. Suggestions?

Give me Shelter – Part 2


As alluded to in Part 1 we did wind up purchasing fully assembled and delivered shelters from a company. The starting of this crazy plan coincided with the Minnesota Horse Expo and there were three shelter companies that were there: West Wind Shelters, Buildings by Alpha, and RFC Portables. All three companies make what appear to be great products. Buildings by Alpha is the farthest away and their delivery cost was significantly higher (understandably) so I didn’t pursue them. That left West Wind Shelters and RFC Portables. The overall cost was on the surface cheaper for a West Wind shelter, but their largest shelter is 10 feet by 30 feet whereas RFC Portables largest shelter is 12 feet by 36 feet and when I calculated out the per-square-foot cost the RFC Portables shelter was cheaper per square foot. There are some other differences to consider, however. West Wind shelters are made on a steel frame that goes all around every edge of the cubes that are the basis of the shelter itself. Versus a timber frame for RFC – RFC also has two versions, one they call the “EZ Move” that has a timber frame all around every edge but it’s a pretty chunky frame and adds to the cost, and the standard one that is truly open front and has nothing running along the bottom edge of the open side of the shelter. Other differences include an all metal outside sheeting for RFC and half-metal half-wood for West Wind Shelters, and lastly the other big difference between the two is that West Wind Shelters anchors their shelters for you when they deliver them and RFC does not provide anchors or anchor them for you. At the time I felt that maximizing square footage and minimizing my cost per square foot were the two most important things – also if my friend and I are going to build one of these shelters on our own, then a timber framed shelter would offer a template for us to work from. With those things in mind we went with RFC Portables and ordered two 12 foot by 36 foot shelters, light gray with white trim and roof.

Quick tip for anyone purchasing a premade structure. See your color options in real life, not just a computer screen! The little chip from the photo said “light gray” and on my computer it looked like “light gray.” But once they were here and in the same visual field as my light gray house, those shelters are taupe! Nate insists no one else will notice or care, but I have to regularly talk myself out of going to the store to buy paint and am successful only because there are so many other things we still need to do!

Because of the maximized length they couldn’t actually span that whole distance with an open space so these shelters are really more like three 12’ x 12’ bays connected together with dividing walls between them. In the shelter that will be a shelter the dividing walls go most of the way up, but in the shelter that will be my make-shift temporary barn I asked to make the dividing walls only half walls and to put a gate in the middle of the wall so I can get in and out of the side bays from the middle bay. This way in winter I can block off the two ends from the worst of the weather and have a somewhat protected space – that is the hope at least.

It took RFC about five weeks to build them and then they were delivered. I should have filmed the process because it is a little mind blowing. They come fully assembled on these flatbed trucks and then they tip the bed of the truck up and let gravity just slide them off. Though they did send me these reference photos as we were figuring out the logistics of whether the open side should be facing the driver side or passenger side for the purpose of unloading them.

To help stabilize them during transport and unloading they have a variety of braces including a very long piece of lumber across the bottom of the open side (where the West Wind Shelters have a steel frame and where the EZ Move shelters have a permanent skid). The first shelter slides off the truck and mostly where we wanted it, it was off by about foot on one end, but considering gravity just slid a 36’ x 12’ three-sided shelter off a flatbed truck, being off by only a foot on one end seemed pretty impressive. The second shelter did not slide off as cleanly, it started sliding off the back of the truck as well as the end of the truck so by the time it was on the ground it was about three feet off from where we wanted it. They looked at it and declared that we could just move it with a skid steer  You know – that skid steer we do not have. If you are not familiar a skid steer is the generic name for the machine, though you may have heard of them as a Bobcat, that is a specific company that happens to make skid steers (kind of like facial tissue and Kleenex). Or we could move it with a truck and chains – you know – that truck we also don’t have. They did leave us with the giant pieces of bracing lumber that ran along the bottom edge of the open side since we would have to move it so much. Then they left and we had to figure out how we were going to shift this giant thing.

We did look into renting a skid steer but the rental starts at $150 and goes up from there once you add delivery, time, etc. There is also the tiny issue that neither of us has a clue how to operate one. We asked around a few places and were in the midst of arguing over the merits of trying to do this with a truck and if so do we rent a truck or see if we could borrow someone’s when I decided on a whim to call the neighbors and see if they by chance had a skid steer and could they possibly help us out and they did! But they were unavailable for a few days, but the neighbor another two houses down also had one and she was sure he would be happy to help. She kindly gave me their name and number and having never met this person in my life I called to see if they could do me a favor – I felt very awkward – “Hello stranger I have literally never met, can you help me?” Asking for help is weirdly hard for me. But he was super nice and came over the next day to help us out. The shelter that was off by about three feet, but still had the braces on, shifted pretty easily once we got everything positioned correctly so I thought – hey, that went so well, lets shift that other shelter, the one that no longer has a brace, over just that one tiny foot. We positioned everything and started moving it when I noticed that the dividing walls between the bays were NOT moving with the far wall. I said “good enough” lets stop there, thanked him for his time and willingness to help out a total stranger, and we both went about our days. Later that day I was laying out where the fence needed to go and happened to look at that second shelter from a different angle and saw that one of the dividing wall between the bays was no longer square – it was pretty seriously bent out of true – crap! It took almost an entire day for me to work up the courage to text him and ask if he could come back out to help fix it – why is asking for help so hard? I finally managed it because I mentally reversed our situations, and I would in a heartbeat help a neighbor if I had the equipment and would have no issue coming back out if it didn’t go exactly right the first time. Seriously – need to work on the asking for help thing. He came over the next day and all we had to do was lift that wall up a few inches and the act of sliding the skids back out shifted it back into place (mostly) its not 100% square, but like 98% square – which is still a high A.

Now we just needed to anchor them. How hard could that be?

Give me Shelter – Part 1


Waiting for the fence materials to arrive we turned our attention to shelters, plural. My long-term plan is to have three shelters. It is very windy where we live and we don’t have just one prevailing direction. Winter tends to be more west, north-west and summer south, south-east – but some of the worst storms in both seasons switch – it is very annoying and makes it hard to place one shelter that would be able to safely harbor my horses all year round. Leeloo also hates bugs almost as much as I do but will not keep fly related “clothing” on. Flymasks are rubbed off within hours. Fly boots are actively ripped off with her teeth the moment I take her halter off. I have this long-term idea of creating a summer “bug” shelter that would have solar powered fans running and shade – it’s not a fully formed idea yet – but what this means is ultimately I want three shelters. I also want to plan for some additional animals as this hobby farm grows so I wanted the biggest shelters I could get so they can handle additional animals when they come – no reason to buy something twice!

Bringing Leeloo home before a barn is built also leads to some other major logistical issues that need to be addressed. Where are we storing hay for the winter? Where are we going to have vet appointments and farrier appointments in the winter? Where am I going to actually be able to bring my horse in to work with? One of the paddock paradise principals is that the paddock is the horse’s home and personal space so you shouldn’t do stuff with them in it. Also, I hate weather of all kinds and want a place to get out of it to do stuff with my horse whenever possible. I put all of this together with my long-term goal of having three shelters to come up with the following plan. One shelter would be used as its name implies and would be the shelter for the animals. We’d place it in consideration of the strongest winter winds since those are the biggest deal. The other two shelters would be outside of the paddock and would face each other with a space in-between. One of them would be used to store hay – because hay cannot sit outside in the elements – and the other would be my makeshift “barn” with a stall of sorts on either side where I could bring a horse in to feed or doctor or trim or groom and the middle would be an “aisle-way” of sorts and storage. This meant I was looking at getting the three largest shelters I could. BUT – because this is all temporary until we get an actual barn built and a permanent paddock track created and because I didn’t want to deal with the city and building permits – these shelters need to be temporary and moveable, no permanent structures allowed.

Some credit for all this craziness of getting Leeloo home before there is a barn belongs to a non-horse-having friend who asked me last summer why I didn’t just bring Leeloo home. I listed the many barriers to that happening – fence, shelter, water, hay storage, poop management, place to do stuff with her in winter, etc. Having a horse at home is far more work and far more complicated than having a cat or a dog. But that conversation planted a seed that unbeknownst to me was germinating all that time so when my farrier said this spring “She’s never going to be sound in this environment.” that seed sprouted into this current madness. That same friend is also one of the most confident, go-for it, we-can-do-it, optimistic people I know. Which is good for me because I am only confident with things I have a lot of experience with and I tend to view the world from a pessimistic (realistic?) lens. When I told this friend that her crazy and totally impractical suggestion from last summer apparently germinated into this thing actually happening, but that I was still concerned about the cost of everything including how expensive a three-sided shelter was, she very confidently declared that together she and I could build the shelters I needed by ourselves for less money and in a reasonable time frame.

Some key background information: Neither of us are accomplished woodworkers, we are novices at best. Nate and I did take a community woodworking class several years ago and built two Adirondack chairs and a bench. The bench has a persistent wobble that we haven’t been able to fix and one of the Adirondack chairs had a loose seat slat issue from the very beginning, but we didn’t realize it until we were moving it out of the classroom to get it home and at that point were both too embarrassed to bring it back inside to fix it (this is why it’s good for me to have a confident friend). My friend has slightly more experience than that, but still definitely in novice territory. We also both have full time jobs and she has kids – and she tried really hard to talk me into building these shelters ourselves and was confident we could get them done in the same time-frame the professional companies I was looking at could get them done. She almost managed to convince me. Almost.

I talked her down to building one shelter, the one that would be used for hay for now and would long term be my crazy “summer bug” shelter, since potentially wrecking a perfectly fine and expensive shelter on a half-baked idea doesn’t make much sense, but wrecking a shelter made by two novices that probably isn’t going to be so great to begin with seems far more reasonable. I also have several other building projects in mind including hay boxes and some compost bays and said I would love her help with those projects. These conversations happened in April. In this case pessimistic caution turned out to be the right call because the shelters ordered from the company arrived weeks ago and to-date my friend and I have managed to build one, singular, hay box.

 

That still needs a lid.